Warning: strpos() [function.strpos]: needle is not a string or an integer in /home/beardedd/public_html/home/index.php on line 41
hOme.beardedDonkey - HOWTO: Remove Air Filter Housing from 2002 Mazda Tribute
HOWTO: Remove Air Filter Housing from 2002 Mazda Tribute 
Here is a step-by-step guide for removing the air filter housing ("air box") from a 2002 Mazda Tribute. Sorry no photos yet. I am still jiggering around with mine and havent gotten to that yet.

I ripped out the air filter housing today foolishly following instructions in the manual. I didn't have to pull it out, but I documented it so I put it up for the internet. Read More...

[ view entry ] ( 1667 views )   |  [ 0 trackbacks ]   |  permalink  |   ( 3 / 1140 )
Samsung Galaxy Tab 7 - Corroded Mainboard/Charging Socket Fix 
This article documents how I fixed a Samsung Galaxy Tablet 7 inch from a no boot state. The problem was corrosion in the charging socket. Note that this advice is given with no responsibility if you try it yourself. Enjoy! Read More...

[ view entry ] ( 5829 views )   |  [ 0 trackbacks ]   |  permalink  |  related link  |   ( 2.9 / 1034 )
SNIPPET: OpenWRT on Netgear WGT346U Dumbass Help - Setting up after "generic failsafe firstboot" or from a fresh installation 
This entry contains what I did to get my OpenWRT configured after performing a firstboot command on the Netgear WGT346U. Issuing the firstboot command resets the device back to the "stock" settings.

You might also like this entry if you are setting up OpenWRT from a fresh install.

This guide covers:
- Setting up initial network for internet access from router
- Checking opkg.conf has the correct repository source
- Updating opkg
- Installing nano editor
- Installing USB support
- Configuring automount of partitions and swap on USB device
- Installing wifi drivers
- Initial wifi config
- Configuring router as a wireless routed client to an existing wireless network with bridged ethernet LAN
- Configuring firewall after setting up as a bridged client

It assumes:
- You have just installed or 'firstboot'ed OpenWRT on the router
- The router is connected to an existing network by ethernet cable
- Said existing network has internet access and allows the router access to the internet
- You know how to use vi text editor to edit a file See this page specifically the "Editing Files in vi - The Bare Basics" section
- You have no idea what you are doing

Read More...

[ view entry ] ( 4499 views )   |  [ 0 trackbacks ]   |  permalink  |   ( 3 / 1087 )
SNIPPET: OpenWRT on Netgear WGT346U Dumbass Help - Packages to install to use USB for storage devices 
This is a snippet to help me if I ever need to do this again.

I figure there are 3 sections to installing packages in OpenWRT on my WGT346U to make it support accessing my USB storage devices:
1. Basic USB Suppport
2. Kernel support
3. File System support
Read More...

[ view entry ] ( 1340 views )   |  [ 0 trackbacks ]   |  permalink  |   ( 3 / 1049 )

<<First <Back | 17 | 18 | 19 | 20 | 21 | 22 | 23 | 24 | 25 | 26 | Next> Last>>