Warning: strpos() [function.strpos]: needle is not a string or an integer in /home/beardedd/public_html/home/index.php on line 41
hOme.beardedDonkey - Samsung Galaxy Tab 7 - Corroded Mainboard/Charging Socket Fix
Samsung Galaxy Tab 7 - Corroded Mainboard/Charging Socket Fix 
This article documents how I fixed a Samsung Galaxy Tablet 7 inch from a no boot state. The problem was corrosion in the charging socket. Note that this advice is given with no responsibility if you try it yourself. Enjoy! Read More...

[ view entry ] ( 5895 views )   |  [ 0 trackbacks ]   |  permalink  |  related link  |   ( 2.9 / 1034 )
Recipe: Satay Chicken 
My wife made this tonight and it is fantastic. 5 stars! Note that she slightly modified the recipe from the original, which is linked to below. All credit to the original author (?) of the recipe. Read More...

[ view entry ] ( 31225 views )   |  [ 0 trackbacks ]   |  permalink  |  related link  |   ( 3 / 1370 )
SNIPPET: OpenWRT on Netgear WGT346U Dumbass Help - Setting up after "generic failsafe firstboot" or from a fresh installation 
This entry contains what I did to get my OpenWRT configured after performing a firstboot command on the Netgear WGT346U. Issuing the firstboot command resets the device back to the "stock" settings.

You might also like this entry if you are setting up OpenWRT from a fresh install.

This guide covers:
- Setting up initial network for internet access from router
- Checking opkg.conf has the correct repository source
- Updating opkg
- Installing nano editor
- Installing USB support
- Configuring automount of partitions and swap on USB device
- Installing wifi drivers
- Initial wifi config
- Configuring router as a wireless routed client to an existing wireless network with bridged ethernet LAN
- Configuring firewall after setting up as a bridged client

It assumes:
- You have just installed or 'firstboot'ed OpenWRT on the router
- The router is connected to an existing network by ethernet cable
- Said existing network has internet access and allows the router access to the internet
- You know how to use vi text editor to edit a file See this page specifically the "Editing Files in vi - The Bare Basics" section
- You have no idea what you are doing

Read More...

[ view entry ] ( 4510 views )   |  [ 0 trackbacks ]   |  permalink  |   ( 3 / 1087 )
SNIPPET: OpenWRT on Netgear WGT346U Dumbass Help - Installing WIFI drivers 
This entry is a snippet for me if I ever have to do this again.

After installing a new firmware - saving config files you will need to install the wifi drivers again. Read More...

[ view entry ] ( 1076 views )   |  [ 0 trackbacks ]   |  permalink  |   ( 3 / 855 )

<<First <Back | 17 | 18 | 19 | 20 | 21 | 22 | 23 | 24 | 25 | 26 | Next> Last>>